Description
for milling, drilling, cutting and edge processing.
|
Machine no. |
0-201-90-5347 |
|
Production time |
839h |
|
Actual operating time |
5843h |
|
Basic machine |
|
|
2 subframe |
1 x left (main spindle) and 1 x right (gluing unit) |
|
2 independent Y-axes |
for main spindle and glueing unit |
|
Aggregate carrier left is designed for two separate Z-axes (Z1, Z2). Enables rapid alternate use of drill head and main spindle. |
|
|
Max. useful workspace |
6175 x 1850 x 300 mm |
|
Max. useful workspace (gluing) |
6000 x 1775 x 60 mm |
|
Travel Z – axis |
600 mm |
|
Speeds |
|
|
Vector velocity |
113 m / min |
|
X and Y axis |
80 m / min |
|
Z-axis |
30 m / min |
|
Workpiece lengths max: |
|
|
Single – tool diameter 25 mm |
6175 mm |
|
Pendulum – tool diameter 25 mm |
2550 mm |
|
Single – All units |
6000 mm |
|
Pendulum All units |
2375 mm |
|
Workpiece width max: |
|
|
Single – tool diameter 25 mm |
1850 mm |
|
Single – All units |
1700 mm |
|
Glue |
1775 mm |
|
Workpiece thickness: |
|
|
Max. 300 mm |
Including clamping device when used as a router |
|
Up to max. 60 mm |
With standard clamp without restriction for aggregates and extraction |
|
Min. Workpiece size |
depends on: clamping devices, workpiece surface and contour |
|
Clamping table: |
|
|
Consoles incl. Front stop |
10 pcs. |
|
Stop behind (fixed) |
6 pcs. |
|
Lifting rails |
6 pcs. |
|
Console length |
1640 mm |
|
Stop bolt stroke: |
140 mm |
|
Slide- |
3 pcs. for workpieces with cover layer overrun |
|
Side stops |
left (1st place) – 2 pcs, right (2nd place) – 2 pcs, right (mirror place) – 2 pcs. |
|
Vacuum clamps |
about 20 pcs. |
|
Double occupancy or oscillation |
|
|
LED position indicator console |
Optical LED display system for manual positioning of vacuum clamps and consoles. The consoles and vacuum clamping positions programmed in the woodWOP are displayed visually in a 5 mm LED grid in the X and Y directions on the support table. |
|
Vacuum system |
|
|
2 pcs. Reinforced vacuum pumps |
Power per.100 / 140 m3 / h |
|
Main spindle |
|
|
Engine |
15 kW |
|
Tool holder |
HSK 63 |
|
Direction of rotation |
Right left |
|
Number of revolutions |
Infinitely 1000 – 24,000 rpm |
|
Spindle cooling |
liquid cooled |
|
C-axis |
with aggregate interface for Optimat |
|
Tool diameter |
Milling tools 180 mm, grinding tools 200 mm |
|
Tools changer |
|
|
Tools changer 12-compartment |
D = 135, for tools and units with HSK F63 |
|
MPU Multi Procesing Unit |
with C axis +/- 185 ° for drilling and sawing at any angle |
|
Drilling head 30 spindles |
V20 / H10 / 360 °, speed max. 7500 rpm, motor 2.7 kW |
|
20 vertical spindles HIGH-SPEED |
Arrangement of the spindles in U-shape: 3 drill rows with 11, 3 and 6 spindle, spindle distance 32mm, spindle disengaging stroke 60 mm, direction of rotation: right, left in change |
|
10 horizontal drill spindles |
Extension stroke: 60 mm in Z-direction, arrangement of spindles in pairs, 4 drill spindle pairs, pitch 32 mm, 1 pair of drill spindles, distance 320 mm, direction of rotation 5 x left, 5 x right |
|
Grooving and dicing saw |
Saw blade diameter 200mm, saw blade width max. 5 mm, cutting depth caps max. 68 mm, cutting depth separating cut max. 25 mm, reverse direction of rotation. |
|
Mounting spindle 6 kW for drill head 30 spindles |
Milling spindle for light milling work, stroke 70 mm, speed 6000 – 18000 1 / min, interface for tool holder HSK F63 with manual clamping system, freely programmable direction of rotation. |
|
Glueing unit POWER EDGE |
|
|
Gluing unit for 360 degree gluing with shock |
|
|
Incl. Granule container and feeder |
|
|
Short wave radiators |
for heating of thick edges |
|
Edge height (edge overhang per side at least 2 mm) |
Max. 65 mm |
|
Edge thickness plastic |
0,4 – 3 mm |
|
Edge thickness veneer |
0,4 – 2 mm |
|
Butt joint |
Straight portion of workpiece edge min. 250mm, radius min. 300 mm |
|
Edge magazine |
for roles |
|
Pre-board station and 2 – roll B 200 + 300 + 400 |
2-compartment roller table with roller separation device for automatic edge changes for edges of the same height. Roll diameter 800 mm |
|
Aggregate: |
|
|
Lock box milling unit |
with 2 spindles D = 16/20, e.g. for lock case and face milling cut out horizontally on doors, staket holes, etc. Speed max. 12,000 rpm, |
|
Extension C-axis for FLEX-5 unit |
|
|
Flush trimming |
for tool changer. Simultaneous processing from above and below. |
|
Combination flush trimming and finishing unit toll diameter 60 mm |
for flush milling of the edge overhangs and for the post-cleaning of the pre-milled edges |
|
Blower nozzle workpiece edge |
|
|
Control system Power Control PC85 |
based on Windows PC |
|
Hardware |
Operating system Windows XP. Industrial PC min. 2 Ghz and 512 Mb RAM. TFT flat screen 17 inches. |
|
Software |
|
|
PC85 CNC core |
|
|
PC85 software package with graphical operating programs |
woodWOP-PACK AV-PC,, diagnosis system woodScout, SCHULER-MDE Professional, woodDesign for AV-PC, woodWOP Wizard |
|
Additional equipment |
|
|
Chip conveyor belt |
Chips and remnants disposal via an integrated chip conveyor |
|
Control cabinet freestanding on castors (with cooling unit) |
Operator terminal integrated in the control cabinet |
|
Communicator |
for remote control of the axes |
|
Teleservice package |
via Internet |
|
Safety device |
Safety guard mat, second side wall, rear wall 1800 high, and protective grid on the right side of the machine, |
|
Electrical connection value |
about 29 kW |
|
Operating voltage |
400V, 50/60 Hz, |
|
Documentation |
available |
|
Mass |
10.000 kg |
|
Space required approx. (LxB) |
10750 x 5750 mm |
|
Location |
Stock Gdansk/Poland |
(Subject to errors, technical modifications and prior sale)
